Residential Electrician in Arlington, TX.
Phanton Mechanical holds its own Texas electrical contractor license — TECL39666 — which means the electrician at your door works for us, not for a sub we found this morning. From dead outlets and flickering lights to new circuits, fixtures, and whole-home surge protection, our crews handle residential electrical across Arlington with the same team that runs our HVAC and solar work.

Everyday Electrical, Done Right
Most residential calls are not exotic — they are the accumulated wear of a house doing its job. We troubleshoot and fix the things that make a home feel unreliable:
- Dead outlets, flickering lights, tripping breakers
- New circuits for appliances, garages, and workshops
- Ceiling fans, fixtures, and recessed lighting
- GFCI and AFCI protection where code requires it
- Whole-home surge protection at the panel
- Smoke and CO detector wiring
Ceiling Fans: Installed on the Right Box
We install new ceiling fans — including where a light fixture used to be — replace old ones, and repair fans that wobble, hum, click, or stop changing speeds. The detail that matters on an install is the box in the ceiling: a fan is heavy and it vibrates, so it has to hang from a box rated for fan support, not the light-fixture box that was already there. Attic fans and bathroom exhaust fans are covered on our ventilation page.
When to Call an Electrician Right Away
Some electrical problems can wait for a convenient appointment. These cannot — they are signs of overheating or arcing, the conditions behind most electrical fires:
- A burning or hot-plastic smell from an outlet, switch, or the panel
- Outlets or switch plates that feel warm to the touch, or show scorch marks
- Buzzing, crackling, or sizzling from outlets, switches, or the panel
- Lights that dim sharply when an appliance or the AC starts
- A breaker that trips again immediately after being reset
- Any shock — even a mild tingle — from an appliance, fixture, or outlet
What to Expect From a Service Visit
A standard electrical service call is $89. Troubleshooting — tracing a fault you cannot see, like a dead circuit or a breaker that will not hold — is priced separately, and we confirm that price before we start. The electrician traces the problem to its source rather than swapping the nearest part — a dead outlet is often a tripped GFCI two rooms away or a loose connection upstream. Before any work starts, you get the cause and a written price. When the job needs a permit, we pull it and schedule the city inspection, so the work is on record when you sell the house or file an insurance claim.
If we spot hazards beyond the call — a double-tapped breaker, missing GFCI protection in a wet location, aluminum branch wiring — we point them out and rank them by risk, so you can fix what matters now and plan the rest.
Older Arlington Homes Have Older Wiring
A lot of Arlington housing stock dates to the 1960s–80s, and those homes often carry ungrounded outlets, crowded panels, and circuits never meant for today’s loads. We evaluate what is actually unsafe versus what is merely dated, fix the real hazards first, and give you a prioritized list instead of a scare quote. If the panel itself is the bottleneck, see our panel upgrade service.
One Contractor for Electrical, HVAC, and Solar
The reason customers keep us on speed dial: the same company that fixed your AC can wire the new circuit it needs, add the surge protector that shields it, and later install the solar that powers it. No finger-pointing between trades, one accountable team, one number to call. Our reviews are full of electrical customers who came for one plug and stayed for everything else.
Electricians Across Arlington
We are headquartered on Stadium Dr E, so every part of Arlington — North Arlington, downtown and the Entertainment District, East and South Arlington — is close, along with Pantego and Dalworthington Gardens. Residential electrical service also covers the surrounding cities, including Grand Prairie, Mansfield, and Fort Worth.
What Customers Say.
Real customer quotes, word for word. Rated 4.8 out of 5 across 58 Google reviews.
“I had an emergency with my breaker and needed it fixed urgently. With less than one hour they were here and got the project completed just in time for me to make it to work! Greatly appreciated the promptness and professionalism. Highly recommended!”
“Put in a request late on a Thursday evening after home had a power issue in one of my kids bedrooms. First thing the very next morning received a notification from Phantom that they could get me in that afternoon. Showed up on time and performed work quickly and explained what they were doing and how they would fix issue. Great experience and definitely recommend”
“Great job by these folks. A circuit breaker would not reset so they came in and check out the panel and found that it was actually a more complex issue, due to a surge that happened with a close lightning strike a bit earlier on in the day. Charged a very reasonable fee for the amount of time that it took to fix. I recommend them!”
Common Questions.
Straight answers before you call.
How much does an electrician visit cost?
A standard electrical service call is $89. Troubleshooting a hidden fault is priced separately because it is a different kind of job — we confirm that price with you before any work starts, and you get a written quote for the repair itself.
Why does part of my house have no power when the breakers look fine?
Check for a tripped GFCI outlet first — one GFCI in a bathroom, kitchen, or garage can protect several outlets downstream, and pressing its Reset button restores them. If that does not work, a breaker may have tripped without moving fully to Off (switch it all the way off, then on), or there may be a loose connection or a failing breaker. If none of that restores power, call — partial power can also signal a problem on the utility side.
My outlet is warm or smells like burning — what should I do?
Stop using it, unplug anything connected if you can do so safely, and turn off the breaker for that circuit. Heat and burning smells mean a loose connection or overloaded device arcing inside the box. Call us right away; if you see smoke or flame, call 911.
Are your electricians licensed?
Yes — Phanton Mechanical holds Texas Electrical Contractor license TECL39666, verifiable with TDLR. Electrical work is performed under our own license, not subcontracted.
Why do my breakers keep tripping?
Usually one of three things: a circuit genuinely overloaded by modern appliances, a failing breaker, or a fault (short or ground fault) somewhere on the circuit. Resetting it repeatedly is not a fix — the diagnosis tells us whether you need a new circuit, a new breaker, or a repair.
Can you add outlets or circuits to an older home?
Yes. We add grounded circuits, dedicated appliance circuits, and exterior/garage power to older Arlington homes routinely, and we pull permits when the work requires them.
Can you install a ceiling fan where I have a light fixture now?
Usually, yes. The existing box often is not rated to hold a fan, so we swap it for a fan-rated box and brace before hanging the fan. If you want the fan and light on separate switches, we can add the wiring for that too.
Is whole-home surge protection worth it?
For homes full of electronics, variable-speed HVAC equipment, and EV chargers — yes. A panel-mounted surge protector is a modest add-on that shields everything downstream, and Texas storm season gives it plenty of work.
Electrical problem? Licensed help is a call away.
Related: Ceiling Fans · Panel Upgrades & EV Chargers · Attic & Exhaust Fans · All Electrical Services · All Residential Services