Electrical Contractor in Arlington, TX.
Phanton Mechanical is a licensed Texas electrical contractor (TECL39666) based in Arlington. Our own electricians handle service calls, troubleshooting, repairs, and wiring in homes, commercial buildings, and industrial facilities across Dallas–Fort Worth — and wire ground-up new construction, from single-family homes to apartment complexes.
Electrical Work We Do, by Sector.
One Texas electrical contractor license, four kinds of work.
Residential Electrical
Licensed electricians for the house you live in — from a dead outlet to a new panel, and any wiring the home needs.
- ·Service calls and troubleshooting
- ·Repairs — outlets, switches, breakers, fixtures
- ·Panel upgrades and service changes
- ·EV charger circuits
- ·Ceiling fans and lighting
- ·New circuits and wiring
Commercial Electrical
Service, repairs, and wiring for retail stores, churches, and other commercial buildings — from one service call to a complete electrical renovation.
- ·Service calls and troubleshooting
- ·Repairs
- ·Electrical demolition and renovation
- ·Conduit, wire, and panels
- ·Transformers
- ·Lighting and fixtures
- ·Tenant finish-outs
Industrial Electrical
The same licensed scope inside industrial facilities, handled by our own electricians.
- ·Service calls
- ·Troubleshooting
- ·Repairs
- ·Wiring
Ground-Up New Construction
Electrical for new residential buildings, wired from the ground up.
- ·Single-family homes
- ·Duplexes
- ·Residential complexes
- ·Apartments
Electrical work by Phanton’s electricians — distribution gear and panel terminations at Renovation Church in Midlothian, and rough-in wiring in a new DFW home.



Commercial Electrical Work, Documented.
Two 2026 jobs where Phanton’s electricians did the electrical work.
At L’Occitane in Southlake Town Square, the electrical scope was a complete renovation of the store: demolition of the existing electrical, then new conduit, new wiring, and the lighting.
At Renovation Church in Midlothian, Phanton’s electricians installed the transformers and all of the electrical panels, ran the conduit, pulled the wire, and hung the light fixtures for the church’s new sanctuary addition.
Where Each Electrical Job Starts.
A homeowner with a dead circuit and a builder with a set of drawings start in different places. This is where each one goes.
| Sector | Electrical work we do | How a job starts |
|---|---|---|
| Residential | Service calls, troubleshooting, repairs, panel upgrades, EV charger circuits, ceiling fans, new circuits and wiring | Call (817) 886-6899. A standard service call is $89; troubleshooting is priced separately and confirmed before we start |
| Commercial | Service calls, troubleshooting, repairs, electrical demolition, conduit, wiring, panels, transformers, lighting, tenant finish-outs | Email plans and scope to estimating@phantonmechanical.com, or call for a service visit |
| Industrial | Service calls, troubleshooting, repairs, wiring | Call or email with the facility, the equipment involved, and the schedule |
| New construction | Ground-up electrical for single-family homes, duplexes, residential complexes, and apartments | Email drawings and schedule to estimating@phantonmechanical.com for a quote |
Sources: ENERGY STAR — Ceiling Fans · ENERGY STAR — EV Chargers · U.S. DOE Alternative Fuels Data Center — Electric Vehicle Charging Stations · EC&M Code Q&A — Boxes at Ceiling-Suspended Fan Outlets (NEC 314.27(C))
What a Texas Electrical Contractor License Covers.
What the state means by “electrical work,” who has to stand behind it, and who inspects it.
Electrical contractors in Texas are licensed by the Texas Department of Licensing and Regulation (TDLR). TDLR’s compliance guide defines electrical work as “any labor or material used in installing, maintaining, or extending an electrical wiring system and the appurtenances, apparatus, or equipment used in connection with the use of electrical energy, in, on, outside, or attached to a building, residence, structure, property, or premises.” The definition does not change with the kind of building — which is why one license covers a house, a store, and a plant.
A contractor license has to have a Master Electrician behind it. In TDLR’s words, an electrical contractor “must either obtain and assign your own Master Electrician license to your company, or employ a licensed Master Electrician” to serve as the company’s Master Electrician of Record. A contractor’s license number carries the letters TECL — ours is TECL39666 — and anyone can look it up in TDLR’s public license search.
Inspections are local. TDLR states that the local licensing or inspecting authority — cities, counties, and regions with jurisdiction — is responsible for inspecting the work performed in its area, and that TDLR does not perform those inspections. When a job needs a permit, we pull it and schedule the inspection.
What Electrical Customers Say.
Google reviews that describe electrical work, quoted word for word. Rated 4.8 out of 5 across 58 Google reviews.
“I had them come out and switch out a plug for me. They were on time and did a great job. Very fair price. I will definitely use them again if I have any electrical issues.”
“I have worked with Phanton on 3 different projects for my home. Electrical outlets and surge protector for the house. Timely, efficient, super nice and they clean up after.”
“Great job by these folks. A circuit breaker would not reset so they came in and check out the panel and found that it was actually a more complex issue, due to a surge that happened with a close lightning strike a bit earlier on in the day. Charged a very reasonable fee for the amount of time that it took to fix. I recommend them!”
Electrical Contractor Questions.
Licensing, scope, pricing, and how to get a quote.
Is Phanton Mechanical a licensed electrical contractor in Texas?
Yes. Phanton Mechanical, LLC holds Texas Electrical Contractor License TECL39666, issued by the Texas Department of Licensing and Regulation (TDLR). You can verify it in TDLR’s public license search by license number or by business name.
Do you do commercial and industrial electrical work, or only residential?
All three. Our electricians handle service calls, troubleshooting, repairs, and wiring in homes, commercial buildings, and industrial facilities. Recent commercial work includes a complete electrical renovation at L’Occitane in Southlake, and the transformers, panels, conduit, wiring, and lighting for the new sanctuary addition at Renovation Church in Midlothian.
Do you wire new construction?
Yes. We wire ground-up new construction: single-family homes, duplexes, residential complexes, and apartments. Send the drawings and the schedule to estimating@phantonmechanical.com and we will quote the electrical scope.
How much does an electrician cost in Arlington, TX?
A standard electrical service call is $89. Troubleshooting — tracing a fault you cannot see, like a dead circuit or a breaker that will not hold — is priced separately, and we confirm that price before we start. Larger work such as panel upgrades, renovations, and new construction is quoted for the specific job.
What is the difference between an electrician and an electrical contractor in Texas?
An electrical contractor is the licensed business — its license number starts with the letters TECL. TDLR requires every electrical contractor to hold, or employ, a licensed Master Electrician assigned to the company as its Master Electrician of Record. When you hire Phanton Mechanical, your agreement is with the license holder, TECL39666.
Does the same company also do HVAC?
Yes. Phanton Mechanical also holds Texas Air Conditioning and Refrigeration Contractor License TACLA124868E. When a job needs both trades — a new circuit for an AC system, a tenant finish-out, a panel upgrade ahead of a heat pump — one company handles both.
What areas do you serve for electrical work?
We are based at 615 Stadium Dr E, Suite 3 in Arlington and work across the Dallas–Fort Worth Metroplex, including Fort Worth, Mansfield, and Grand Prairie. Our most recent commercial electrical projects were in Southlake and Midlothian.
How do I get a quote for a commercial electrical job?
Email the plans, the scope, and the schedule to estimating@phantonmechanical.com, or call (817) 886-6899. For a repair or a troubleshooting call at a business, calling is the fastest way to get an electrician scheduled.
Have an electrical job to price?
Homeowners: call for a service visit. Builders, owners, and facility managers: send the plans and the scope to our estimating team. Mon–Sat 8AM–9PM · Sunday by appointment.

