Commercial HVAC · TACLA124868E

Commercial HVAC Contractor in Arlington, TX.

Phanton Mechanical is a commercial HVAC contractor based in Arlington, Texas, licensed by the state as a Class A air conditioning contractor (TACLA124868E). Our crews take service calls and repairs, replace rooftop units, install ductwork, deliver the mechanical scope of tenant finish-outs and institutional buildouts, and run maintenance contracts for commercial buildings across Dallas–Fort Worth.

As a mechanical contractor, we have worked on Tormenta Rampaging Run at Six Flags Over Texas, the Arizona College of Nursing campus, L’Occitane at Southlake Town Square, Pandora at Stonebriar Centre, and TruGrocer Federal Credit Union.

Commercial HVAC Services

What Our Commercial HVAC Crews Do.

Six kinds of commercial work. Rooftop unit replacement, tenant finish-outs, maintenance contracts, and institutional buildings each have their own page, linked below the cards.

01

Commercial HVAC Repair & Service Calls

Service calls and repairs for the heating and cooling equipment on commercial buildings. A commercial service call is $125.

  • ·Packaged rooftop units
  • ·VAV, VRF, and chilled-water systems
  • ·Controls
  • ·Commercial and industrial exhaust fans
  • ·After-hours service calls
02

Rooftop Unit (RTU) Replacement

Replacement of packaged rooftop units on stores, offices, and other commercial buildings — sized from a load calculation and set by crane.

  • ·Repair and replacement quoted side by side
  • ·Load calculation and sizing
  • ·Crane lift planned around business hours
  • ·Curb adapters, economizers, and unit controls
  • ·Startup and commissioning
03

Ductwork & Tenant Finish-Outs

The mechanical scope of a retail or office buildout — equipment, air distribution, and zoning — built in properties that stay open around the work.

  • ·Ductwork — concealed or exposed spiral
  • ·Comfort zoning for sales floors, back-of-house, and offices
  • ·New equipment or modifications to existing rooftop units
  • ·Startup, balancing, and commissioning
  • ·Night-shift work in active malls and retail centers
04

VAV, VRF & Chilled-Water Systems

Work on the systems that serve larger, multi-zone buildings, and on the controls that run them.

  • ·VAV (variable air volume) systems
  • ·VRF (variable refrigerant flow) systems
  • ·Chilled-water systems
  • ·Controls and building automation (BAS) integration
05

Maintenance Contracts & Fan Service

Scheduled maintenance written from your equipment list and occupancy, plus repair and balancing of commercial and industrial exhaust fans.

  • ·Seasonal inspections
  • ·Filter programs
  • ·Coil cleaning, belt and bearing checks
  • ·Refrigerant verification
  • ·Exhaust fan repair and balancing
  • ·One contract for several locations
06

Institutional Buildings

Mechanical and ductwork scope for campuses and financial institutions, delivered to an opening date that does not move.

  • ·Classrooms and simulation labs
  • ·Administrative space
  • ·Zoned controls
  • ·Schedules set by the academic calendar
  • ·Financial institutions
  • ·Healthcare and government buildings
Field Documentation

From active commercial buildouts — suspended fan coil units, insulated duct runs, and coordinated rough-in.

Ceiling-hung fan coil unit with insulated ductwork installed in a commercial buildoutSuspended air handler with filter and insulated duct runs in a concrete commercial structureFan coil unit and labeled electrical rough-in during a commercial mechanical installation
Repair & Service Calls

Commercial HVAC Repair and Service Calls.

A commercial service call is $125. We take commercial service calls after hours as well.

Phanton Mechanical takes commercial HVAC service calls and repairs for businesses across Dallas–Fort Worth, from its base at 615 Stadium Dr E, Suite 3 in Arlington. A commercial service call is $125.

Our regular hours are Monday through Saturday, 8AM to 9PM, with Sunday by appointment. We also take commercial service calls after hours.

Our technicians work on packaged rooftop units, VAV and VRF systems, chilled-water systems, and their controls, and they repair and balance commercial and industrial exhaust fans. Phanton Mechanical holds a Class A license, which TDLR states allows work on any size unit. When a rooftop unit is near the end of its service life, we quote the repair and the replacement side by side.

Systems

Commercial HVAC Systems We Work On.

Packaged rooftop units, VAV, VRF, and chilled water — and the controls that run them.

Phanton Mechanical works on four kinds of commercial HVAC system: packaged rooftop units, VAV, VRF, and chilled water. We also work on the controls that run them, including integration with a building automation system (BAS). The table shows how each system conditions a building and how it is zoned.

Commercial HVAC systems Phanton Mechanical works on: how each system conditions a building and how it is zoned
SystemHow it conditions the buildingHow it is zoned
Packaged rooftop unit (RTU)One self-contained unit on the roof heats and cools the air and sends it through the ductworkOne zone per unit, unless the unit feeds VAV boxes
VAV (variable air volume)An air handler or rooftop unit supplies air to VAV boxes, and each box varies the airflow to its zoneOne zone per VAV box
VRF (variable refrigerant flow)An outdoor unit serves several indoor units through refrigerant piping and varies the refrigerant flow to each oneOne zone per indoor unit
Chilled waterA chiller cools water that is pumped to air handlers and fan coil units in the buildingBy air handler and fan coil unit
Commercial HVAC Projects

Commercial HVAC Projects Across Dallas–Fort Worth.

Five mechanical projects, 2023 to 2026: a roller coaster, two retail stores, a college campus, and a credit union.

Commercial HVAC projects by Phanton Mechanical: building, project, mechanical scope, city and year
BuildingProjectMechanical scopeCity and year
Roller coasterTormenta Rampaging Run, Six Flags Over TexasVentilation, controls, and mechanical systems for the station, queue areas, equipment rooms, and back-of-house spaces, including a four-zone Lennox mini-split systemArlington, 2025–2026
Retail store, open-air centerL’Occitane en Provence, Southlake Town SquareNew air distribution with low-profile linear slot diffusersSouthlake, 2026
College campusArizona College of NursingFull mechanical and ductwork scope, with zoned controls for classrooms, simulation labs, and administrative spacesFort Worth, 2024
Retail store, enclosed mallPandora, Stonebriar CentreRetail buildout tied into the mall’s trunk HVAC systemFrisco, 2023
Credit unionTruGrocer Federal Credit UnionPackaged HVAC equipment, full ductwork, and comfort zoning, with exposed spiral ductwork across the lobbyNorth Richland Hills, 2023

The jobs run from a single store tied into a mall’s trunk HVAC system to the ventilation, controls, and mechanical systems for a roller coaster’s station and equipment rooms. Each project has its own page with the full scope. The cards below open Tormenta Rampaging Run and TruGrocer Federal Credit Union; the other three are the Arizona College of Nursing campus in Fort Worth, Pandora at Stonebriar Centre in Frisco, and L’Occitane at Southlake Town Square.

Commercial Electrical

Commercial Electrical From the Same Company.

Phanton Mechanical also holds Texas Electrical Contractor License TECL39666.

Our electricians take commercial service calls, repairs, and wiring, and on a tenant finish-out they carry the electrical scope alongside the HVAC.

At L’Occitane in Southlake Town Square, the electrical scope was a complete renovation of the store: demolition of the existing electrical, then new conduit, new wiring, and the lighting.

At Renovation Church in Midlothian, Phanton’s electricians installed the transformers and all of the electrical panels, ran the conduit, pulled the wire, and hung the light fixtures for the church’s new sanctuary addition.

Maintenance

What Planned Maintenance Saves.

The U.S. Department of Energy’s Federal Energy Management Program (FEMP) compares three ways to maintain building equipment.

FEMP calls reactive maintenance the “run it until it breaks” approach. A preventive program works on a schedule, and a predictive program works from measurements of the equipment’s condition. FEMP’s savings estimates for each are below.

Our maintenance contracts are preventive programs: scheduled visits written from your equipment list and occupancy — seasonal inspections, a filter program, coil cleaning, belt and bearing checks, refrigerant verification, and exhaust fan inspection, repair, and balancing. One contract can cover a single building or several locations.

Preventive Savings
12–18%
preventive maintenance vs. a reactive program (DOE FEMP)
Additional Savings
8–12%
predictive vs. preventive maintenance alone (DOE FEMP)
Savings Opportunity
30–40%+
for facilities that rely on reactive maintenance (DOE FEMP)
Energy Bill Savings
5–20%
from O&M programs targeting energy efficiency, without a significant capital investment (DOE FEMP)

Sources: DOE FEMP — O&M Best Practices (Maintenance Approaches)

Licensing

Licensed for Any Size Commercial Unit.

What Texas requires of a commercial HVAC contractor, what a Class A license adds, and the insurance behind it.

Texas licenses heating and air conditioning contractors through the Texas Department of Licensing and Regulation (TDLR). TDLR states that “Contractors who install, repair, or maintain systems related to air conditioning, refrigeration, or heating must have a TDLR license.” That covers the rooftop units on a store as much as the system at a house.

For commercial work, the license class is the part to check. In TDLR’s words, “The Class A license allows you to work on any size unit,” while “The Class B license allows you to work on cooling systems of 25 tons and under, and heating systems of 1.5 million BTUs/hour and under.” Phanton Mechanical holds a Class A license, TACLA124868E, with the Environmental Air Conditioning endorsement, which TDLR describes as “treating air to control temperature, humidity, cleanliness, ventilation, and circulation to meet human comfort requirements.”

TDLR also requires a contractor to “maintain commercial general liability insurance at all times while your license is active.” For a Class A license, the minimum is $300,000 per occurrence and $600,000 aggregate for property damage and bodily injury.

Electrical work is licensed separately. TDLR’s compliance guide defines it as “any labor or material used in installing, maintaining, or extending an electrical wiring system and the appurtenances, apparatus, or equipment used in connection with the use of electrical energy, in, on, outside, or attached to a building, residence, structure, property, or premises.” Phanton Mechanical holds Texas Electrical Contractor License TECL39666 for that work. Anyone can confirm TACLA124868E in TDLR’s public license search by searching for the business name, and the electrical license can be looked up in the same search.

Source: TDLR — Air Conditioning and Refrigeration Contractors · TDLR — Apply for a Contractor License · TDLR — Electricians Compliance Guide

Frequently Asked Questions

Commercial HVAC Questions.

What owners, general contractors, and facility managers ask before working with us.

Is Phanton Mechanical a licensed commercial HVAC contractor in Texas?

Yes. Phanton Mechanical, LLC holds Texas Air Conditioning and Refrigeration Contractor License TACLA124868E, issued by the Texas Department of Licensing and Regulation (TDLR). It is a Class A license with the Environmental Air Conditioning endorsement, and TDLR states that a Class A license allows work on any size unit. You can confirm it in TDLR’s public license search by searching for the business name.

What commercial HVAC work do you do?

Service calls and repairs, rooftop unit (RTU) replacement, ductwork, the mechanical scope of tenant finish-outs and institutional buildouts, maintenance contracts, and repair and balancing of commercial and industrial exhaust fans. We work on packaged rooftop units, VAV, VRF, and chilled-water systems, and on their controls, including building automation system (BAS) integration. Rooftop unit replacement, tenant finish-outs, institutional buildings, and maintenance contracts each have their own page on this site.

Do you take commercial HVAC repair calls, and what does a service call cost?

Yes. Phanton Mechanical takes commercial HVAC service calls and repairs across Dallas–Fort Worth. A commercial service call is $125. Our regular hours are Monday through Saturday, 8AM to 9PM, with Sunday by appointment, and we also take commercial service calls after hours. Call (817) 886-6899.

Is Phanton Mechanical a mechanical contractor or an HVAC contractor?

Both names describe us. On a commercial job, the HVAC work — equipment, ductwork, ventilation, and zoning — is the mechanical scope, and the company that carries it is the mechanical contractor. In Texas that work is done under an Air Conditioning and Refrigeration Contractor License. Ours is TACLA124868E, Class A.

What kinds of commercial buildings have you worked on?

A roller coaster station, retail stores, a college campus, a credit union, and a church. The mechanical projects are Tormenta Rampaging Run at Six Flags Over Texas in Arlington, L’Occitane en Provence at Southlake Town Square, the Arizona College of Nursing campus in Fort Worth, Pandora at Stonebriar Centre in Frisco, and TruGrocer Federal Credit Union in North Richland Hills. At Renovation Church in Midlothian, our electricians installed the transformers and panels, ran the conduit, pulled the wire, and hung the light fixtures for the new sanctuary addition. We also take commercial HVAC work in healthcare and government buildings.

Do you replace commercial rooftop units (RTUs)?

Yes. We run a load calculation instead of copying the size of the old unit, plan the crane lift around your business hours — weekend and early-morning lifts are routine — and commission the new unit after it is set. We quote the repair and the replacement side by side so you can compare them.

Do you offer commercial HVAC maintenance contracts?

Yes. A contract is written from your equipment list and occupancy: seasonal inspections, a filter program, coil cleaning, belt and bearing checks, refrigerant verification, and exhaust fan inspection, repair, and balancing. One contract can cover a single building or several locations. The U.S. Department of Energy’s Federal Energy Management Program estimates 12% to 18% cost savings for a preventive maintenance program over a reactive one.

Can you work in an occupied building or an open store?

Yes. Our Pandora buildout at Stonebriar Centre in Frisco ran inside an operating mall, with the work staged on night shifts and coordinated with mall operations. We plan phasing, protection, and after-hours work around your operations.

Can you handle the electrical work on a commercial HVAC job?

Yes. Phanton Mechanical also holds Texas Electrical Contractor License TECL39666, so the power, panels, and lighting on a job can stay with the same company. At L’Occitane in Southlake Town Square we did both trades: new air distribution and a complete electrical renovation of the store.

What areas do you serve for commercial HVAC?

We are based at 615 Stadium Dr E, Suite 3 in Arlington and work across the Dallas–Fort Worth Metroplex. Our commercial projects have been in Arlington, Fort Worth, North Richland Hills, Frisco, Southlake, and Midlothian.

How do I get a commercial HVAC quote?

Email the plans, the scope, and the schedule — or, for a maintenance contract, your equipment list — to estimating@phantonmechanical.com, or call (817) 886-6899. Our estimating team reviews commercial inquiries on weekdays and responds with a scope-aligned proposal. For a repair or a service call, call (817) 886-6899.

Ready for a proposal?

Send the plans, the scope, and the schedule — or the equipment list for a maintenance contract — to our estimating team, which reviews commercial inquiries on weekdays. For a repair or a service call, call (817) 886-6899. Mon–Sat 8AM–9PM · Sunday by appointment.