HVAC Contractor in Arlington, TX.
Phanton Mechanical is a licensed Texas Air Conditioning and Refrigeration Contractor (TACLA124868E, Class A) based in Arlington. Our technicians repair, replace, and maintain air conditioning, heating, and ventilation systems in homes and commercial buildings across Dallas–Fort Worth — from a no-cooling call at a house to the rooftop units and ductwork on a commercial buildout.
Heating and Cooling Work We Do.
One Texas air conditioning contractor license, Class A, four kinds of work.
Air Conditioning Repair & Replacement
Diagnosis and repair for central air conditioners and heat pumps, starting with a flat $89 diagnostic visit — and replacement when another repair no longer makes sense.
- ·Capacitors, contactors, and fan motors
- ·Refrigerant leaks — locate, repair, recharge
- ·Frozen coils and clogged drain lines
- ·Control boards
- ·Central AC and heat pump replacement
- ·Tune-ups and seasonal checkups
Heating — Furnaces & Heat Pumps
Gas furnace and heat pump repair, with a heat-exchanger inspection on every furnace visit, and replacements sized to the house with a load calculation.
- ·Ignitors, flame sensors, and inducer motors
- ·Gas valves and control boards
- ·Heat pump defrost and backup heat
- ·Furnace and heat pump replacement
- ·Dual-fuel systems
Thermostats, Zoning & Ventilation
The controls and the air movement around the equipment: thermostats wired and configured for the system they run, and fans ducted so the air actually leaves the house.
- ·Smart thermostats — Nest, ecobee, Honeywell
- ·C-wire installation
- ·Heat pump and dual-fuel configuration
- ·Zoning-system thermostats
- ·Attic fans and bathroom exhaust fans
- ·Kitchen vent hoods and roof ducting
Commercial HVAC
Mechanical work for retail stores, institutional buildings, and other commercial properties — from one rooftop-unit replacement to the full mechanical scope of a buildout.
- ·Service calls and repairs
- ·Rooftop unit (RTU) replacement
- ·Maintenance contracts
- ·Exhaust fan repair and balancing
- ·Tenant finish-outs
- ·Ductwork — concealed or exposed spiral
- ·Zoning, startup, and commissioning
HVAC work by Phanton’s technicians — new outdoor units at DFW homes, and a ceiling-hung fan coil with insulated ductwork in a commercial buildout.



Commercial HVAC Work, Documented.
Commercial mechanical work across Dallas–Fort Worth, 2023 to 2026.
At Six Flags Over Texas in Arlington, our crews coordinated the ventilation, controls, and mechanical systems for Tormenta Rampaging Run — the station, queue areas, equipment rooms, and back-of-house spaces — including a four-zone Lennox mini-split system that conditions the ride equipment and support spaces.
At TruGrocer Federal Credit Union in North Richland Hills, the package covered packaged HVAC equipment, full ductwork, and comfort zoning, with the spiral ductwork across the lobby left exposed as a finished design element. At L’Occitane in Southlake Town Square, the mechanical scope was new air distribution with low-profile linear slot diffusers.
Two more are in the portfolio: the full mechanical and ductwork scope for the Arizona College of Nursing campus in Fort Worth, with zoned controls for classrooms, simulation labs, and administrative spaces, and a retail buildout for Pandora at Stonebriar Centre in Frisco, tied into the mall’s trunk HVAC system.
Where Each HVAC Job Starts.
A homeowner with no cooling and a property manager with a roof full of units start in different places. This is where each one goes.
| Job | HVAC work we do | How a job starts |
|---|---|---|
| Home repair | AC, heat pump, and furnace diagnosis and repair; thermostats; attic, bathroom, and kitchen ventilation | Call (817) 886-6899. The diagnostic visit is a flat $89, and you get a written repair price before any work starts |
| Home replacement | Central AC, heat pump, and furnace replacement, including dual-fuel systems | Call for a visit. We size the new system to the house with a load calculation and put the replacement price in writing |
| Commercial service and maintenance | Service calls and repairs, seasonal inspections, filter programs, coil cleaning, refrigerant verification, exhaust fan repair and balancing | Call (817) 886-6899 for a service call — a commercial service call is $125 — or email your equipment list to estimating@phantonmechanical.com to price a maintenance contract |
| Commercial projects | Rooftop unit replacement, tenant finish-outs, ductwork, zoning, startup and commissioning | Email plans, scope, and schedule to estimating@phantonmechanical.com |
Sources: ENERGY STAR — Heat & Cool Efficiently · ENERGY STAR — Duct Sealing · DOE FEMP — O&M Best Practices (Maintenance Approaches)
What a Texas Air Conditioning License Covers.
Who has to be licensed, what Class A means, and how to read the license number.
Heating and air conditioning contractors in Texas are licensed by the Texas Department of Licensing and Regulation (TDLR). TDLR states that “Contractors who install, repair, or maintain systems related to air conditioning, refrigeration, or heating must have a TDLR license” — ductless systems included. TDLR’s guidance is that a mini-split “is not self-contained, it is a split AC system,” so installing or repairing one for the public takes a contractor license.
The license class sets the size of the equipment a contractor may work on. In TDLR’s words, “The Class A license allows you to work on any size unit,” while “The Class B license allows you to work on cooling systems of 25 tons and under, and heating systems of 1.5 million BTUs/hour and under.” Ours is Class A, with the Environmental Air Conditioning endorsement — which TDLR describes as “treating air to control temperature, humidity, cleanliness, ventilation, and circulation to meet human comfort requirements.” That is why one license covers the system at a house and the rooftop units on a commercial building.
The license number says the same thing. TDLR writes contractor license numbers as title, class, number, and endorsement. Ours is TACLA124868E: TACL, Class A, number 124868, endorsement E for Environmental Air Conditioning. TDLR also requires a contractor to “maintain commercial general liability insurance at all times while your license is active” — for a Class A license, at least $300,000 per occurrence. Anyone can confirm the license in TDLR’s public license search by searching for the business name.
Source: TDLR — Air Conditioning and Refrigeration Contractors · TDLR — Apply for a Contractor License · TDLR — Air Conditioning and Refrigeration FAQ
What HVAC Customers Say.
Google reviews that describe heating, cooling, and ventilation work, quoted word for word. Rated 4.8 out of 5 across 58 Google reviews.
“As soon as we realized the house was 80 degrees and our AC wasn't working, we reached out to Phanton. They arrived within an hour and were able to diagnose the issue and fix it for a fair price. We went to bed that night in a cool house. THANK YOU!!!”
“We have had other AC techs come out to investigate the same issue in previous years for the same reason: in house unit iced over. From the day I made the call to Phanton, they kept me informed of the progress, the arrival, the issue, and cost repairs. Our only delay was pending the warranty claims approval. Oscar and Raul most helpful in describing the cause which was the outside unit, and fixed it.”
“I needed to get my mini split system in good working condition, they had a full schedule but were still able to get me in late evening. Communication was good and the a/c technicians were friendly. Definitely recommend Phanton Mechanical for anything A/C related”
“Needed the furnace blower replaced. They came in quickly and replaced. Their price was very competitive with others as well. I thank you Phanton for a job well done”
“Professional HVAC service and was understanding of my budget needs for an HVAC repair”
“I am really pleased. We had a replacement vent hood installed, and they had [to] replace the ducting to the roof. They were able to quickly (next day) book to come out and inspect and bid it.”
HVAC Contractor Questions.
Licensing, pricing, scope, and how to get a quote.
Is Phanton Mechanical a licensed HVAC contractor in Texas?
Yes. Phanton Mechanical, LLC holds Texas Air Conditioning and Refrigeration Contractor License TACLA124868E, issued by the Texas Department of Licensing and Regulation (TDLR). It is a Class A license with the Environmental Air Conditioning endorsement. You can confirm it in TDLR’s public license search by searching for the business name.
How much does an HVAC service call cost in Arlington, TX?
The HVAC diagnostic visit is a flat $89. A technician inspects the whole system, tells you what failed and why, and gives you a written repair price before any work starts. A commercial service call is $125. System replacements and commercial projects are quoted for the specific job.
Do you work on homes, commercial buildings, or both?
Both. In homes we repair and replace air conditioners, heat pumps, and furnaces, install thermostats, and install or replace attic fans, bathroom exhaust fans, and kitchen vent hoods. In commercial buildings we take service calls and repairs, replace rooftop units, run maintenance contracts, and deliver the mechanical scope of tenant finish-outs and institutional buildouts. Commercial projects include Tormenta Rampaging Run at Six Flags Over Texas, TruGrocer Federal Credit Union, and the Arizona College of Nursing campus in Fort Worth.
What does a Class A air conditioning license mean in Texas?
TDLR issues air conditioning contractor licenses in two classes. In TDLR’s words, “The Class A license allows you to work on any size unit,” while “The Class B license allows you to work on cooling systems of 25 tons and under, and heating systems of 1.5 million BTUs/hour and under.” Phanton Mechanical’s license, TACLA124868E, is Class A, so the same license covers a residential system and the rooftop equipment on a commercial building.
Do you install and repair mini-split systems?
Yes. At Six Flags Over Texas we installed a four-zone Lennox mini-split system that conditions the ride equipment and support spaces of the Tormenta Rampaging Run coaster, and we repair existing mini-split systems. In Texas this is licensed work: TDLR’s guidance is that a mini-split “is not self-contained, it is a split AC system,” so installing or repairing one for the public takes an air conditioning contractor license.
Which HVAC brands do you repair?
Our technicians work on every major residential brand, including Carrier, Trane, Lennox, Goodman, Rheem, and American Standard.
Does the same company also do electrical work?
Yes. Phanton Mechanical also holds Texas Electrical Contractor License TECL39666. When an HVAC job needs electrical work — a new circuit for an air conditioner, a panel upgrade ahead of a heat pump, the power for the equipment on a tenant finish-out — one company handles both.
What areas do you serve for HVAC work?
We are based at 615 Stadium Dr E, Suite 3 in Arlington and work across the Dallas–Fort Worth Metroplex, including Pantego, Dalworthington Gardens, Grand Prairie, Mansfield, and Fort Worth. Our commercial HVAC projects have been in Arlington, Fort Worth, North Richland Hills, Frisco, and Southlake.
How do I get a quote for commercial HVAC work or a maintenance contract?
Email the plans, the scope, and the schedule — or, for a maintenance contract, your equipment list — to estimating@phantonmechanical.com, or call (817) 886-6899. For a repair at a business, calling is the fastest way to get a technician scheduled.
Need heating or cooling work priced?
Homeowners: call for a diagnostic visit. Property managers, owners, and builders: send the equipment list or the plans to our estimating team. Mon–Sat 8AM–9PM · Sunday by appointment.


