← Back to Projects
Commercial · 2026

Renovation Church · Midlothian

Commercial electrical work at Renovation Church in Midlothian — transformers, every electrical panel, conduit, wiring, and light fixtures.

Lobby of the new sanctuary addition at Renovation Church in Midlothian during construction, with parallel conduit runs and pendant light fixtures installed under the exposed roof deck
Year
2026
Location
Midlothian, TX
Type
Commercial Electrical
Scope
Transformers + Panels + Lighting
Project Overview

Scope & Execution.

Phanton Mechanical's electricians worked on the electrical buildout of the new sanctuary addition at Renovation Church, 5010 FM 663 in Midlothian. Our crew installed the transformers, ran the conduit, pulled the wire, installed the light fixtures, and installed every electrical panel in the church.

THE BUILDING — The Texas Department of Licensing and Regulation registration for this project describes a new 15,561-square-foot sanctuary addition: a 780-seat sanctuary, a 3,400-square-foot lobby and fellowship space, and a 1,100-square-foot platform with support spaces. A room built to seat 780 people needs a commercial electrical system — three-phase distribution gear, transformers, and conduit sized for a large public space, not a residential panel.

THE SCOPE — Power distribution starts at the main distribution panel: Eaton gear labeled 480Y/277V, three-phase, four-wire, with a surge protective device built into the lineup. From there the work followed the full path of a commercial electrical system: the transformers, every panel in the building, the conduit and wire between them, and the light fixtures at the end of the runs.

WHAT THE PHOTOS SHOW — The gallery below is the installation itself. The main distribution panel with its molded-case breakers and the surge protective device showing green status lights. An open panel interior, with the feeders landed on their lugs, the phases identified with colored tape, and the torque value written inside the enclosure next to the terminations. And the lobby during construction: parallel runs of metal conduit racked under the roof deck, with the pendant light fixtures already hung.

WHY IT MATTERS — Most of the portfolio on this site is mechanical. This project shows the other trade. Phanton Mechanical holds Texas Electrical Contractor License TECL39666, and the same license that covers a tripped breaker or a panel upgrade at a home in Arlington also covers three-phase distribution, transformers, and conduit for a building like this one. If you are a general contractor, owner, or facilities lead pricing the electrical scope of a commercial or church project in DFW, this is the kind of work to call us about.

Source: TDLR project registration TABS2025012128

Photo Gallery

On-site documentation.

Eaton main distribution panel labeled MDP 480Y/277V 3PH 4W at Renovation Church, with molded-case breakers and a surge protective device showing green status lightsOpen Eaton panel interior at Renovation Church showing feeders landed on the lugs, phase conductors identified with red and blue tape, and a torque value written inside the enclosureParallel runs of metal conduit and black pendant light fixtures under the roof deck of the Renovation Church lobby during construction
Have a similar project?

Let's scope your next build.